Why arc flash study pricing varies
There is no single price for an arc flash study because the work scales with your electrical system. A small commercial building with one service and a dozen panels is a very different project from a chemical plant with medium-voltage switchgear, several substations and dozens of motor control centers. The ranges above are meant to help with early budgeting; a firm quote requires the engineering firm to understand your specific facility.
The main factors that drive cost
Number of equipment locations
The biggest single driver is the number of buses — switchboards, panels, MCCs, disconnects and transformers — that must be documented, modeled and labeled. Every location needs field data, modeling, calculation and a label. Providing an approximate count of panels and MCCs in your request helps the engineers estimate this quickly.
Service size and voltage levels
Larger services and medium-voltage equipment usually mean more complex protection schemes, relays and transformers. Medium-voltage systems may also require coordination with the utility for fault current and protective device information.
Existing documentation
An accurate, current one-line diagram can significantly reduce field time. If diagrams are missing or outdated, the engineering team must trace and document the system, which adds labor. If you are unsure, select “Unsure” in the form — that is very common.
Field data collection
Collecting nameplate data, cable sizes and lengths, and protective device settings is often the most time-consuming part of the project. Some facilities choose to have their own electricians or contractor gather portions of the data under the engineer's direction; others prefer the engineering firm to handle it entirely.
Operating scenarios
Facilities with generators, multiple utility feeds, tie breakers or UPS systems may need several scenarios modeled so labels reflect the worst realistic case. Each scenario adds analysis time.
Scope extras
- Detailed protective device coordination recommendations
- Label printing and installation
- Incident energy reduction recommendations
- Updated CAD one-line diagrams
- Training for qualified electrical workers
- After-hours or shutdown-window data collection
Location and access
Travel to remote sites — common in the Permian Basin and rural Texas — and restricted-access areas that require escorts, permits or safety orientation can add time.
New study vs. update
NFPA 70E requires the arc flash risk assessment to be reviewed at least every five years and updated after major modifications. If your previous study's model files are available and the system has changed only modestly, an update can cost less than a new study. If the old study was performed by a different firm and the model isn't available, the engineers may need to rebuild it.
How to get the most accurate quote
- Give an approximate service size (amps) and number of panels and MCCs.
- Tell us whether an existing one-line diagram exists.
- Mention generators, UPS systems and medium-voltage equipment.
- Share your timeline and any shutdown windows.
Use the form below. Your request goes to a partner licensed PE firm, which will contact you to confirm scope and provide a proposal. Want background first? Read our NFPA 70E compliance guide.