Texas Arc Flash StudyGet a quote

Fort Worth and Tarrant County

Arc Flash Study in Fort Worth, Texas

Fort Worth's mix of aerospace manufacturing, large logistics hubs and energy-sector operations creates a wide range of electrical systems — and a wide range of arc flash study needs. Tell us about your facility and we'll forward your request to a partner firm of licensed Professional Engineers for a quote.

Request a free quote

Takes about 60 seconds. No obligation.

By submitting, you agree to our Terms of use.

This site is a quote-request service. We connect Texas businesses with a partner firm of licensed Professional Engineers (PE). We are not a licensed engineering firm, do not perform engineering work, sign or seal studies, or provide engineering advice. All engineering is contracted directly with the licensed firm.

Arc flash risk assessments for Fort Worth facilities

An arc flash study — sometimes called an arc flash hazard analysis or arc flash risk assessment — calculates how much thermal energy could be released if an arcing fault occurred at a piece of electrical equipment. The results determine the arc flash boundary, the incident energy at a working distance, and the personal protective equipment (PPE) workers need. NFPA 70E, the Standard for Electrical Safety in the Workplace, uses this information as part of its overall electrical safety program, and OSHA expects employers to identify and protect workers from electrical hazards.

In Fort Worth and Tarrant County, the facilities that request studies most often include:

  • Aerospace and defense manufacturing
  • Logistics and rail-served distribution
  • Oil & gas support operations
  • Food and beverage processing
  • Municipal and commercial buildings

Industry context in Fort Worth

Aerospace and advanced manufacturing facilities in the Fort Worth area often include high-capacity services, test equipment, compressed air systems and extensive motor loads. Precise protective device coordination matters here: a well-coordinated system both limits incident energy and avoids unnecessary trips that interrupt production.

The logistics corridor around Alliance, along I-35W and near rail yards, includes very large distribution buildings with conveyor systems, sortation equipment and battery charging rooms. These facilities typically have long feeder runs and many panels, which affects how much field time a study requires.

Energy-sector companies with yards, shops and compression facilities around the Barnett Shale region often run equipment that is portable or reconfigured over time. An arc flash risk assessment needs to reflect how the system actually operates, so engineers will usually ask about typical configurations.

What a typical arc flash study includes

  • Field data collection — verifying transformers, cables, breakers, fuses, relays and their settings.
  • One-line diagram updates — creating or correcting the single-line diagram so it reflects the installed system.
  • Short-circuit study — calculating available fault current throughout the system, using utility data where available.
  • Protective device coordination — reviewing how breakers, fuses and relays interact, and recommending settings changes.
  • Incident energy analysis — calculating incident energy and arc flash boundaries, commonly using IEEE 1584 methods.
  • Arc flash labels — printed labels for each assessed equipment location, plus a written report.

Exact scope and deliverables are defined by the engineering firm in its proposal. Many Fort Worth facilities also ask for recommendations to reduce incident energy, such as maintenance switches or revised breaker settings, so that more work can be performed at lower PPE categories.

When Fort Worth facilities need a new or updated study

NFPA 70E requires that the arc flash risk assessment be reviewed for accuracy at intervals not to exceed five years, and updated when a major modification or renovation takes place. In practice, common triggers include a new utility transformer or service upgrade, added generators or UPS systems, new production lines or MCCs, replaced switchgear, and changes in protective device settings. If you're not sure whether your existing study is still valid, select “Arc flash update” in the form and explain what has changed.

How the quote process works

You fill out the form with basic facility details. We forward your request to our partner licensed PE firm, which reviews it and contacts you directly to clarify scope and provide a proposal. There is no obligation, and any contract is between you and the engineering firm. For a rough sense of budget, see our arc flash study cost guide, and for the regulatory background read our NFPA 70E and OSHA overview.

Texas Arc Flash Study is a quote-request service and does not itself perform engineering work. Engineering services are provided by licensed Professional Engineers.

Frequently asked questions

Which areas around Fort Worth are covered?+

Requests from Fort Worth, Arlington, Grand Prairie, Haltom City, Keller, Mansfield, Burleson, Weatherford and the Alliance corridor are forwarded to our partner PE firm.

We have many small panels across a large building. Is that a problem?+

Not at all — it simply affects scope. Providing an approximate panel and MCC count in the form helps the engineers give a more accurate quote.

Can you also prepare an SPCC plan for our fuel storage?+

If your facility stores oil above EPA thresholds, you can request an SPCC plan quote at the same time. Select “SPCC plan” or mention it in the notes.

Does this site perform arc flash studies in Fort Worth?+

No. Texas Arc Flash Study is a quote-request service. We forward your request to a partner firm of licensed Professional Engineers, who performs and contracts the work directly with you.

How often does an arc flash study need to be updated?+

NFPA 70E requires the arc flash risk assessment to be reviewed for accuracy at least every five years, and whenever a major modification or renovation takes place.

Request a free quote

Takes about 60 seconds. No obligation.

By submitting, you agree to our Terms of use.

This site is a quote-request service. We connect Texas businesses with a partner firm of licensed Professional Engineers (PE). We are not a licensed engineering firm, do not perform engineering work, sign or seal studies, or provide engineering advice. All engineering is contracted directly with the licensed firm.