Texas Arc Flash StudyGet a quote

Midland, Odessa and the Permian Basin

Arc Flash Study in Midland–Odessa, Texas

The Permian Basin is the heart of Texas oil production, and its well sites, compressor stations, processing plants and service yards all rely on electrical systems that must be assessed for arc flash hazards. Tell us about your facility and we'll forward your request to a partner firm of licensed Professional Engineers for a quote.

Request a free quote

Takes about 60 seconds. No obligation.

By submitting, you agree to our Terms of use.

This site is a quote-request service. We connect Texas businesses with a partner firm of licensed Professional Engineers (PE). We are not a licensed engineering firm, do not perform engineering work, sign or seal studies, or provide engineering advice. All engineering is contracted directly with the licensed firm.

Arc flash risk assessments for Midland–Odessa facilities

An arc flash study — sometimes called an arc flash hazard analysis or arc flash risk assessment — calculates how much thermal energy could be released if an arcing fault occurred at a piece of electrical equipment. The results determine the arc flash boundary, the incident energy at a working distance, and the personal protective equipment (PPE) workers need. NFPA 70E, the Standard for Electrical Safety in the Workplace, uses this information as part of its overall electrical safety program, and OSHA expects employers to identify and protect workers from electrical hazards.

In Midland, Odessa and the Permian Basin, the facilities that request studies most often include:

  • Upstream oil & gas production
  • Midstream compression and processing
  • Saltwater disposal facilities
  • Oilfield service yards and shops
  • Electrical contractors serving the Permian

Industry context in Midland–Odessa

Permian Basin production sites increasingly use grid power for artificial lift, electric compression and pumping, replacing or supplementing on-site generation. Each new utility service, transformer or electrical upgrade can change arc flash hazards at the equipment workers operate every day.

Midstream compressor stations, gas processing plants and saltwater disposal facilities typically include motor control centers, VFDs and switchgear that should be covered by a current arc flash study and labels. Many of these facilities also store crude oil, condensate or other oils above EPA thresholds and need SPCC plans.

Because Permian operations are spread over large distances, engineers often plan field data collection to visit multiple sites efficiently. Providing a list of locations and approximate equipment at each site helps them scope the work.

What a typical arc flash study includes

  • Field data collection — verifying transformers, cables, breakers, fuses, relays and their settings.
  • One-line diagram updates — creating or correcting the single-line diagram so it reflects the installed system.
  • Short-circuit study — calculating available fault current throughout the system, using utility data where available.
  • Protective device coordination — reviewing how breakers, fuses and relays interact, and recommending settings changes.
  • Incident energy analysis — calculating incident energy and arc flash boundaries, commonly using IEEE 1584 methods.
  • Arc flash labels — printed labels for each assessed equipment location, plus a written report.

Exact scope and deliverables are defined by the engineering firm in its proposal. Many Midland–Odessa facilities also ask for recommendations to reduce incident energy, such as maintenance switches or revised breaker settings, so that more work can be performed at lower PPE categories.

When Midland–Odessa facilities need a new or updated study

NFPA 70E requires that the arc flash risk assessment be reviewed for accuracy at intervals not to exceed five years, and updated when a major modification or renovation takes place. In practice, common triggers include a new utility transformer or service upgrade, added generators or UPS systems, new production lines or MCCs, replaced switchgear, and changes in protective device settings. If you're not sure whether your existing study is still valid, select “Arc flash update” in the form and explain what has changed.

How the quote process works

You fill out the form with basic facility details. We forward your request to our partner licensed PE firm, which reviews it and contacts you directly to clarify scope and provide a proposal. There is no obligation, and any contract is between you and the engineering firm. For a rough sense of budget, see our arc flash study cost guide, and for the regulatory background read our NFPA 70E and OSHA overview.

Texas Arc Flash Study is a quote-request service and does not itself perform engineering work. Engineering services are provided by licensed Professional Engineers.

Frequently asked questions

Can multiple well sites or stations be included in one request?+

Yes. List the number of sites and approximate equipment at each in the notes. Multi-site programs are common in the Permian.

Do oil & gas production sites need SPCC plans?+

Many do. Facilities with aggregate aboveground oil storage capacity over 1,320 gallons that could reasonably discharge to navigable waters are generally subject to the SPCC rule. See our SPCC page for details.

Do you cover areas outside Midland and Odessa?+

Requests from across the Permian Basin — including Big Spring, Andrews, Pecos, Monahans and surrounding counties — can be submitted.

Does this site perform arc flash studies in Midland–Odessa?+

No. Texas Arc Flash Study is a quote-request service. We forward your request to a partner firm of licensed Professional Engineers, who performs and contracts the work directly with you.

How often does an arc flash study need to be updated?+

NFPA 70E requires the arc flash risk assessment to be reviewed for accuracy at least every five years, and whenever a major modification or renovation takes place.

Request a free quote

Takes about 60 seconds. No obligation.

By submitting, you agree to our Terms of use.

This site is a quote-request service. We connect Texas businesses with a partner firm of licensed Professional Engineers (PE). We are not a licensed engineering firm, do not perform engineering work, sign or seal studies, or provide engineering advice. All engineering is contracted directly with the licensed firm.